|
|
|
CHECKLIST FOR
CHANGE OF USE WITH WORKS
This checklist will
help you to prepare your application for A Change of Use with other Building
Works. A change of use application is a Full application.
This is not a
conclusive checklist and your Authority may require further information but
this should get you started. Check their website
for their own requirements.
You must submit:
·
The completed application form, signed and dated (either online via
the Planning Portal or by completing the Standard Planning Application
Form from the Council website)
·
The completed ownership certificate, signed and dated (either
online via the Planning Portal or by completing the Standard Planning Application
Form from the Council website)
·
The correct planning application fee (please refer to the fee list: FEES)
·
Details of any pre-application advice received, including reference
numbers
·
Copies of an ordnance survey based location plan at a scale of 1:1250 or
1:2500. It must show the direction of north and the names and numbers of
properties and streets. You should clearly edge the application site with a red
line and draw a blue line around any other adjoining land owned by the
applicant.
·
Copies of a block plan at a scale of 1:500 showing the direction of
north, the proposed development in relation to site boundaries, walls, garden,
open spaces and landscaping, access arrangements, existing and proposed car
parking arrangements, the extent of any hard surfacing, and boundary treatments
where proposed.
·
Copies of existing and proposed floor plans at a scale of not less than
1:100 and the position of any sections.
·
You must also show the species, position, stem diameter (measured
at 1.5m above ground level) of all trees within 15 metres of any proposed
construction activity.
·
Copies of the existing and proposed elevations to a scale of not
less than 1:100.
·
Copies of existing and proposed floor plans at a scale of not less
than 1:100 and the position of any sections.
·
Copies of a Design and Access Statement (including
details of proposed materials to be used for walls, roofs, windows, doors,
hard-standing and boundary treatments).